Anvil 805153 Quick Start Manual

COMPLETE INSTALLATION
SPEED ADJUSTMENT:
TURN VALVE CLOCKWISE TO
DECREASE SPEED, COUNTER-
CLOCKWISE TO INCREASE SPEED.
HINGE
SIDE
DOOR
FRAME
(JAMB)
(4)
LONG
SCREWS
HINGE
SIDE
DOOR
FRAME
(JAMB)
Anvil
EvAmark
Mfg# 805153
Pneumatic Door Closer
Cerrador Neumatico Para Puerta
CAUTION: BE SURE TO READ BEFORE DRILLING HOLES
NOTE: BEFORE INSTALLATION, CHECK DOOR TO SEE THAT
IT CLOSES AND LATCHES FREELY.
Closer may be installed on rail at top of door or on mullion strip near center,
whichever is desired.
STEP
1
At desired height mark hinge side door frame for jamb bracket 1/4" in from
face of storm or screen door and at least 1/2" down from top of frame. Be
sure open side of bracket and arrow faces door. Drill four pilot holes and
fasten bracket with four long screws as shown. Place "Hold-Open Washer"
on rod in front of lugs as shown for correct tension. Use short pin to connect
closer rod to bracket.