Advertisement
furniture lighting
solutions
Installation
1
1
11''''1 ''''1' '''1'' ''1
�
1111
1111
11
The m1n1mum mounting space required
for this product is 120mm x 120mm x
20mm. Mark where you want to position
the light fitting on the cabinet.
Insert 3 x AA batteries into the fitting.
Important Information:
1. LED's are not replaceable
2. Please ensure the batteries are inserted with the correct polarity
3. Exhausted batteries are to be removed from the fitting as soon as they expire
4. We recommend that different types of batteries or new and used batteries are not mixed
5. Do not use rechargeable batteries in this fitting
6. The battery supply terminals are not to be short-circuited
Maintenance & Care
• To clean this product wipe over with a soft, dry cloth periodically.
• Do not use harsh chemical solvents, this may dis-colour or damage the fitting
Sensio, Unit 7, Speedwell Road, Whitwood, Castleford, West Yorkshire, WFl O SPY -
Technical drawings are for illustrative purposes only. Sensio have the right to change any information without prior notice.
Make sure you check all hole cut outs before work commences
D O MA LE D BA TTERY POWERE D SPOT L IGH T
Remove the top of the fitting by twisting
it anti-clockwise and then lifting the top
off.
\
Screw the top of the fitting back onto
the fitting base.
Insert the screws into the screw
holes in the fitting and secure tightly
into position. The screw holes are
positioned 84.6mm apart.
Uk
WWW.Sens iO.CO.
ON
6--U-
OFF
-U--
/ I "
Press the centre of the fitting to turn the
LED's on and then touch again to turn
the LED's off. The fixture's LEDs will shut
off automatically after 10 minutes of
inactivity.
furniture lighting solutions
/1"
6
Advertisement
