Sensio DOMA Installation Instructions

furniture lighting solutions
IMPORTANT:
Please read these instructions before commencing installation and retain for future reference
Components
1 x Battery powered spotlight
Important Safety Information
Please read these instructions carefully before attempting to install this
product. It is advisable to keep these instructions in a safe place for
further reference.
These products must n ot be modified, if an y modification s are made it
may invalidate the warranty and may render the product unsafe.
Install on smooth, flat and secure surface(s) only.
Position the light where it will not be exposed to steam or splashes.
Suitable for furniture lighting.
When the la mp expires the fitting must be replaced.
Product features
The fittin g is turn ed on an d off by pressin g the cen tral section.
Touch once to turn on and then touch again to switch off. The fixture
will automatically switch off after 10 minutes of inactivity
to ensure there is no energy wastage.
Waste Electrical & Electronic Equipment (WEEE)
The symbol on the product, or on the document accompanying the product, the crossed out wheelie bin
symbol, indicates that this product may not be treated as household waste. Instead it should be handed over to
the applicable collection point for recycling or electrical and electronic waste.
Sensio, Unit 7, Speedwell Road, Whitwood, Castleford, West Yorkshire, WFl O SPY -
Technical drawings are for illustrative purposes only. Sensio have the right to change any information without prior notice.
DOMA
LED BATTERY
POWERED
SPOT LIGHT
CODE: SE11009WO
TT
1 x instructions
2 x screws
WWW.Sens iO.CO. LI
Tools Required
r=
I-
'
,_
ruler
pencil
This product requires 3 x AA batteries to run (not included)
k
screwdriver 3 x AA batteries