1. Manuals
  2. Brands
  3. Pinnovators Manuals
  4. Headphone
  5. PinPAC4
  6. Installation manual

Pinnovators PinPAC4 Spike Installation Manual

Hide thumbs Also See for PinPAC4 Spike:
Table of Contents

Advertisement

Quick Links

Download this manual
PinPAC4 Spike,
Spike2 Installation
Manual
Version 1.2 October 6, 2019
1
Contents
Warnings and Agreements ................................ 2
1.
2.
Requirements: ........................................... 3
3.
Preparation ................................................ 3
4.
out Board ........................................................... 4
5.
Back Box Installation: Headphone Audio
cable ................................................................... 6
6.
Running the Headphone Audio cable Error!
Bookmark not defined.
7.
Coin Door Installation PinPAC4: ................ 7
8.
MAC Cable Installation .............................. 8
Coin Door cable Installation .... Error! Bookmark
not defined.
16.
Posi-Taps!............................................... 9
bpog ................................................................... 9
9.
Final Checkout ......................................... 10
10.
Operation and Set audio levels ...... Error!
Bookmark not defined.
11.
Recommended Headphones. .............. 10

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PinPAC4 Spike and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Pinnovators PinPAC4 Spike

Summary of Contents for Pinnovators PinPAC4 Spike

  • Page 1: Table Of Contents

    Contents Warnings and Agreements ........ 2 What’s included in the PinPAC4 Kit ... 2 Requirements: ........... 3 PinPAC4 Spike, Preparation ..........3 Spike2 Installation Back Box Installation: Subwoofer / Audio out Board ............4 Manual Back Box Installation: Headphone Audio cable ..............

  • Page 2: Warnings And Agreements

    Panel is proficient with the basics of pinball repair. Pinnovators requires our kit be installed by an experienced Pinball service technician with basic electrical skills. As with any electrical piece of equipment a danger does exist and you must agree to not hold Pinnovators responsible for any injury, damages, etc.

  • Page 3: Requirements

    2. Requirements: A. The Pinnovators PinPAC4 system require a Universal Validator Door slot on the machine’s Coin door in the lower left location. (H Door) 3. Preparation Unplug the Pinball Machine! Next remove the back glass on the system and open the light board to expose the System circuit board.

  • Page 4: Back Box Installation: Subwoofer / Audio Out Board

    Run the cables down through the bottom of the back box and into the main cabinet. Plug (Optional accessory) Pinnovators 3.5 mm 12ft cable from the subwoofer cable kit into the 3.5mm green jack on the Back Box Board (BBB). Connect the 3.5mm Interface cable into the RJ45...
  • Page 5 5. USB Cable 6. Subwoofer cable (Optional) The subwoofer cable is now an optional Spike: accessory and available on the Pinnovators.com Insert the end of the USB cable into the open website. USB receptacle on the CPU board. Gently push up on one of the vent screens underneath the pinball machine.

  • Page 6: Cable

    7. Panel Interface Cable Using a helper, remove the playfield glass and lift up the playfield. Depending on the game, tuck the new cable into the wire harness clips as shown. NOTE: Leave some slack in the cable so the back box can be easily folded down without stretching the cable! Continue to route the cable along the wire harness.

  • Page 7: Coin Door Installation Pinpac4

    8. Coin Door Installation PinPAC4: Remove validator blank plate by unbolting the four nuts as shown. Note: Save the spacers. The spacers are used to properly space the length of the screw. Insert the end of the RJ45 Cable into the connector on the PinPAC4 front control panel as shown.

  • Page 8: Mac Cable Installation

    9. MAC Cable Installation This section of the instructions is for SPIKE and SPIKE 2. The MAC cable has a small Printed Circuit board Route the PP4MAC remote cable over the top with connectors mounted to it. The PCB is of the coin slot as shown below.

  • Page 9: Posi-Taps

    This is a picture of the optional adapter along with a few YouTube video links showing how to install the Posi-Taps. Please watch the video first. (Note, Pinnovators did not make the videos) http://www.youtube.com/watch?v=NQWYWuNbpog http://www.youtube.com/watch?v=Yiimgl-Rdmw Connect the the Posi-tap adapter cable for export...

  • Page 10: Final Checkout

    Recommended Headphones. Pinnovators tested the PinPAC1, 2,3 and on many different headphones. Our favorite was the Beats by Dr. Dre. We also tested a moderately priced set of headphones ~$30 and was still blown away by how...

This manual is also suitable for:

Pinpac4 spike2

Table of Contents