Advertisement
SAFETY WARNINGS
• Installation should only be carried out by
competent and authorised personnel and in
accordance with the instructions in this manual.
• Only make electrical connections when the device
is isolated from the main supply.
• If "Automatic Start" is selected be aware that
safety output contacts will switch immediately
after the power supply is connected.
• Opening the device will void the warranty. Never
attempt to repair any device.
• Adhere to Safety Checks.
• DO NOT DEFEAT, TAMPER, OR BYPASS THE
SAFETY FUNCTION. FAILURE TO DO SO CAN
RESULT IN DEATH OR SERIOUS INJURY.
Installation and Maintenance
Installation should as per EN 60204-1 in addition to any local
regulations. The safety relay should be mounted inside a
cabinet enclosure and on a 35mm DIN rail according to DIN
EN 60715. No maintenance is required, there are no
serviceable parts. (Refer to Safety Checks). The product is
designed to be a component of a customised safety
orientated control system. It is the responsibility of the user
to ensure the correct overall functionality of its systems and
machines. IDEM, its subsidiaries and affiliates, are not in a
position to guarantee all of the characteristics of a given
system or product not designed by IDEM.
Safety Checks:
1. Ensure the appropriate safety level is achieved for the application function.
2.
The safety functions must be tested regularly. For applications were infrequent use is foreseeable, the system must have a manual function
test. At least once per month for PLe Cat3/4 or once per year for PLd Cat3 (ISO13849-1 / ISO14119).
Declaration of Conformity
Manufacturer:
Product:
Model types:
The above products conform to the safety requirements of the following directives and standards:
Third Party Certification: NB 0035
M. Mohtasham
IDEM SAFETY SWITCHES Ltd, 2 Ormside Close, Hindley Industrial Estate, Hindley Green, Wigan, WN2 4HR UK. Tel: +44 (0)1942 257070
IDEM (USA) - 4416 Technology Way, Fremont, CA 94538
IDEM SAFETY SWITCHES Ltd.
2 Ormside Close, Hindley Industrial Estate, Hindley Green, Wigan, WN2 4HR, UK
Safety Emergency Stop Devices
SCR-73-i
Machinery Directive 2006/42/EC
EMC Directive 2004/108/EC
Low Voltage Directive 2006/95/EC
EN 13849-1:2008+AC:2009
EN 13849-2:2012
EN 62061:2005+AC:2010+A1:2013
EN 61508 (Parts 1-7): 2011-02
EN 60204-1:2006+A1:2009+AC:2010
EN 50178:1997
TUV Rheinland Industrie Service GmbH
Managing Director
Tel: (510) 445 0751
Email:
• L'installation doit être effectuée par un personnel
compétent et autorisé et en conformité avec les
instructions de ce manuel.
• faites uniquement des connexions électriques lorsque
l'appareil est isolé de l'alimentation principale.
• Si "Démarrage automatique" est sélectionné être conscient
que les contacts de sortie de sécurité passeront
immédiatement après l'alimentation est connectée.
• Ouverture de l'appareil annule la garantie. Ne jamais tenter
de réparer tout appareil.
• Adhérer à des contrôles de sécurité.
NE DÉFAITE PAS, SABOTAGE, OU DE CONTOURNER LA
FONCTION DE SÉCURITÉ. MANQUEMENT À S'Y PEUT
ENTRAÎNER LA MORT OU DES BLESSURES GRAVES
Information Regarding UL 508
Pilot Duty R300, B300
Single contact must be used
250V AC/DC / 6,0A
250V AC/DC 6,0A
Resistive
General Purpose
Single contact must be used
All contact at once can be used
USE COPPER OR COPPER-CLAD ALUMINUM CONDUCTORS
Maximum surround air temperature 40°C
sales@idemsafety.com
Web:
www.idemsafety.com
Fax.: +44 (0)1942 257076
Doc. 102581 Feb 16
Advertisement
