Sensio Powerpod SE80050AL Installation Instructions

InSTAllATIOn
InSTRUCTIOnS
IMPORTAnT: please read these instructions before commencing installation and retain for future reference.
Components
1 x Worktop
socket and
2000mm power
cord with 13A
plug fitted
1 x Template
Important safety information
• If in doubt installation must be carried out by a qualified electrician.
• Minimum installation distance from edge of worktop is 25mm.
• Install on smooth flat surface(s) only.
• Do not install over jointed or uneven surfaces (e.g. titles, melamine
joints etc.).
• Users must not bend the handles beyond their natural vertical position
and both handles should be returned to their resting positions when
pushing the unit down.
IP54
The Pop-up worktop socket has a protection rating of IP54 in accordance
with BS EN 60529:1992 when in retracted position.
This prevents any water ingress into the unit from spraying water
up to an angle of 60° from vertical and also provides dust protection.
Care should be taken to prevent the possibility of water ingress into the
unit during use; please ensure unit is not located near a water supply
with earth leakage protection.
An external earth (ground) connection point is provided next to the cable
exit at the bottom for the unit. For added earth protection, it is advisable
to connect an additional earth lead from this point to any well grounded
point near the unit (if available). Ensure that sufficient slack is available
for this lead to allow the unit to operate correctly.
Waste Electrical & Electronic Equipment (WEEE)
The Symbol on the product, or on the document accompanying the product, the crossed out wheelie
bin symbol, indicated that this product may not be treated as household waste. Instead it shall be
handed over to the applicable collection point for the recycling of electrical and electronic waste.
PowerPod
PoP-uP socket
CODE: SE80050Al
1 x Threaded locking ring
Tools required
90 - 92 mm Power Drill
Hole Cutter
• If the external flexible cable of this socket is damaged, please contact
manufacturer / service agent for replacement product*.
• This is a Class 1 product. Must be earthed.
• If in doubt regarding these installations, consult a qualified electrician.
* Subject to terms.
USB CHARGER SPECIFICATIOn
• Output Voltage: 5VDC
• Output Current: MAX. 500mA x2*
• Individual switch for power on/off
• LED indicator function when power on
* Please check output current of USB product before use.
Green LED indicates Powerpod is charging, red LED indicates power off.
PRODUCT MUST
BE EARTHED