Supplementary Information; Diagnostic Leds; Condition Codes And Zone Numbers - Harrington Signal HS-3030 Operator's Manual

2.0 Supplementary Information

2.1 Diagnostic LEDs

There are 6 LEDs in the middle of the right edge of the Inner Door Assembly for diagnostic
purposes. They are used as follows:
1. extended memory in use
2. addressable database in use
3. follows coded bells
4. not used
5. not used
6. database transfer to co-processor.

2.2 Condition Codes and Zone Numbers

The Alarm List and Archive use the following formats for condition codes and zone numbering.
Condition Code
Archive Alarm List
A
B
C
D
E
G
H
I
J
M
N
P
Q
R
S
T
U
W
A plus sign (+) refers to a new or on condition, a minus sign (-) refers to a restoral or off condition,
and an equal sign (=) refers to a one time event.
Description
ALARM Alarm
bypass Bypass
com Comlink
dupl Duplicate Addressable Device
alert Maintenance Alert
ground Ground Fault
Hot Key Pressed
ilgl Illegal Addressable Device
Switch
msng Missing Addressable Device
nofire Non-Fire/Non-Reporting
M.PULL Pull Station Alarm
abort Releaser Abort
halt Releaser Halt
spv Supervisory
trbl Trouble or Parameter Change
wrong Wrong Device Type
WFLOW Waterflow Alarm
HS-3030 Operator's Manual
11