Warranty - Rivera Sedona Owner's Manual

Table of Contents

Advertisement

Warning:
To avoid the risk of shock or fire, do not expose this amplifier to moisture. Do not
remove the chassis from its cabinet, or remove metal covers from chassis parts. Removing the
chassis from its cabinet exposes extremely dangerous high voltages. There are no user-serviceable
parts inside. Hazardous voltages are present inside the chassis. Refer all servicing to qualified
personnel.
Caution:
To avoid a fire hazard, always replace the fuses with the same type and rating.
Caution:
Always replace the line cord (mains supply) with the proper type.
Caution:
Always turn off the amplifier before making or unplugging any speaker connections.
Always transport your amplifier securely, preferably in a suitable flight case or packing carton.
Before operating your amplifier, be sure the speakers used are properly connected. For countries
where 220 to 240 volts AC
is encountered, make sure that you have the correct power cord. Our 230-volt export unit can be
used with any of these voltages. For Japan 100VAC models, all instructions for the 115VAC
models apply. In the event that you have questions, comments, or suggestions, please contact us at:
W
A R R A N T Y
Subject to the Obligations and Exclusions found below, this RIVERA product is warranted against
manufacturing defects in material and workmanship for the period of one (3) year from the date of
purchase, with the exception of tubes, which carry a 60 day warranty, and loudspeaker drivers,
which are covered for 90 days. The warranty period commences on the date of purchase by the
original user. Performance under this warranty must be obtained at one of the following: a RIVERA
Authorized Service Station, by returning the unit to the RIVERA factory with prior authorization,
or (in countries outside of the United States) by a representative RIVERA distributor. A list of
RIVERA Authorized Service Stations can be obtained from RIVERA, e-mail: support@rivera.com.
1. This warranty will be honored only on the presentation of the original proof of purchase.
2. Transportation of the product to the service station or RIVERA factory is the responsibility of the
user unless specifically stated otherwise in this warranty. RIVERA will pay for return shipping
charges if the repairs are covered by the warranty.
Exclusions
1. This warranty shall not cover adjustment of customer-operated controls as explained in the
appropriate model's instruction manual, or products that have been altered, replaced, or have
missing serial numbers.
2. This warranty shall not apply to the appearance of accessory items including, but not limited to,
cabinets, cabinet parts, or knobs.
3. This warranty does not apply to uncrating, setup, installation, or the removal and reinstallation of
products for repair.
4. This warranty shall not apply to repairs or replacements necessitated by any cause beyond the
control of RIVERA including, but not limited to, any malfunction, defects, or failure caused by or
resulting from unauthorized service or parts, damaged or broken tubes, incorrect line voltage,
Rivera Amplification
508 S. Varney, Burbank, CA 91502 USA
Phone: (818) 767-4600 • Fax: (818) 394-2097
Email: support@rivera.com •
http://www.rivera.com

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sedona lite9000-0011-0037

Table of Contents