Wiring Connection - LG LRNN TE Series Installation Manual

Hanging bolt
(W3/8 or M10)
Nut
(W3/8 or M10)
Spring washer
(M10)
• The following parts are local purchasing.
Hanging Bolt - W 3/8 or M10
Nut - W 3/8 or M10
Spring Washer - M10
Plate Washer - M10

Wiring Connection

• Open the control box cover and connect the remote control cord and Indoor power wires.
Indoor
power cord
Remote
control cord
Terminal Block in Indoor
1(L) 2(N)
INDOOR POWER INPUT
WARNING : Make sure that the screws of the terminal are free from looseness.
Keep the length of the bolt
from the bracket to 40mm
Flat washer for M10
(accessory)
Ceiling board
Flat washer for M10
(accessory)
Nut
(W3/8 or M10)
Adjust the same height
Control box cover
Control box cover
fitting screw(2 units)
3 4
C
Ceiling
Air Conditioner body
Set screw of
Paper pattern
paper pattern (4 pieces)
for installation
Open the ceiling board
along the outer edge of the
paper pattern.
CAUTION : Tighten the nut and bolt
to prevent unit from
falling off.
Terminal Block in Outdoor
D Vcc A
Installation
Ceiling board
[Air inlet side view]
B
Installation Manual 9