Front Brake Installation - BMC timemachine road Assembly Instructions Manual

Front brake installation

1. Apply Loctite to the brake pivot thread and bolt it onto the fork.
Loctite
2. Place the adjuster plate (N°2) into the brake arm (N°1) and screw in the M4 adjustment bolt (N°4).
3. Apply grease to the spring (N°3) and place it in the brake arm. The silver colored spring goes into the right arm.
The longest extension of the spring should point towards the fork.
4. Install the brake arm. Tighten the M5 bolt to 4.5Nm.
Description
Front brake complete set
1 Brake arm
2 Adjuster plate
3 Spring
4 Adjuster bolt
The longer end of the
spring goes into the fork
Part N°
212495
212499
15 / 16