Headset & Fork Installation - BMC timemachine road Assembly Instructions Manual

Headset and Fork Installation
1. Note that the rear brake cable housing should be installed before installing the fork.
1. Apply grease on the bearings (N°3 and 4) and on the bearing seats of the frame. Place the bearings in the frame.
2. Apply grease on the fork shaft, and then slide the fork through the bearings and the head tube.
3. Slide the compression ring (N°2) over the fork shaft.
4. Apply grease on the fork hinge top part then slide the top cap (N°1) over the fork shaft and over the fork hinge.
Description
Headset complete kit
1 Top cap
2 Compression ring
3 Upper bearing
4 Lower bearing
5 Aero road fork "teamred"
Aero road fork "flame"
Aero road fork "white"
Aero road fork "stealth"
Part N°
212485
212474
212475
212476
212477