List Of Command; Bluetooth Command; Wifi Command - Parrot FC6100 Use Manual

Use manual for Parrot ACU

7) List of command

I. Bluetooth command
Command
It is possible to put the Bluetooth in a special mode allowing an external
AT*PBTESTMODE
analyzer to take control of the module and run some tests.
II. Wifi command
Command
AT*SWTM=MODE, CHANNEL, DATA_RATE, POWER
For example if I send: AT*SWTM=2,7,7,10  The module Wi-Fi radiated on channel 7, Tx mode with
a data rate 12M and a power equivalent 10dBm.
Note: CHANNEL, DATA_RATE and POWER must be issued if MODE is TX (2 or 3)
Note: This command is a test command; it shall not be issued in normal operation.
13
Description
Description
MODE :
-0 : Standby
-1 : RX
-2 : TX (Data)
-3 : TX (CW)
CHANNEL :
-1 to 14
DATA_RATE :
=B mode=
-0 : 1M
-1 : 2M
-2 : 5.5M
-3 : 11M
-4 : 22M
=G mode=
-5 : 6M
-6 : 9M
-7 : 12M
-8 : 18M
-9 : 24M
-10 : 36M
-11 : 48M
-12 : 54M
-13 : 72M
POWER :
0 to 20 dBm