II. FC6100 environment ......................3 Setup ..............................4 Module configuration ........................6 Configure your computer ......................10 Communication between the FC6100 and your Computer via Wxhiphop ........11 List of command ..........................13 Bluetooth command ......................13 II. Wifi command ........................13...
Use manual for Parrot ACU 1) Purpose of this document The goal of this document is to describe the Parrot ACU setup and configuration for control the Radiofrequency spectrum. A first part describes the implementation and the configuration of the equipment, a second part describes your computer configuration for connect you on the module.
Use manual for Parrot ACU 2) Product presentation I. Parrot FC6100 module Bluetooth antenna connector Wi-Fi antenna connector (not used on ACU) FC6100 environment The ACU is plugged to the PC with RJ45/USB adaptator USB / RJ45 interface...
Use manual for Parrot ACU 4) Module configuration To connect the module to your computer please follow these instructions... Homepage (Once the module is supplied) Application page Another way is to slide the menu via touch-screen interface to “Application” menu, and...
Page 7
Use manual for Parrot ACU Setting Menu Wireless & network setting...
Page 9
Use manual for Parrot ACU Ethernet preferences Let uncheck both boxes (connect the Ethernet cable with the PC first) Complete address and Netmask with the following information. Click next next next next and OK.
Use manual for Parrot ACU 5) Configure your computer You need to configure your local network on your computer : Go to the network menu and select local network propriety. Double click on TCP/IPv4 menu Use the following IP address and confirm.
Use manual for Parrot ACU 6) Communication between the FC6100 and your Computer via Wxhiphop Use this application for control the RF module emission. You can find on the Parrot USB memory stick. Configure the red item and click open.
Page 12
Use manual for Parrot ACU For Send command: Example: For send a command at module you just need write your command and press enter. The software informs you that the order has been taken into account by the module. You can find the command for Bluetooth and Wi-Fi in the next page.
Use manual for Parrot ACU 7) List of command I. Bluetooth command Command Description It is possible to put the Bluetooth in a special mode allowing an external AT*PBTESTMODE analyzer to take control of the module and run some tests.