Whirlpool RS6300XV Use & Care Manual page 15

Replacing
Hold the surface unit as level as
possible with the terminal just
started into the receptacle. Push
the surface unit terminal into the
receptacle.
2. Line up openings in the reflector
bowl with the surface unit recep-
tacle and the element hold down
clip.
. When terminal is pushed into the
receptacle as far as it will go, push
down the edge of the surface unit
opposite the receptacle. The ele-
ment hold down clip will keep the
surface unit from moving around.
CATION: Reflector bowls reftect heat back to the utensils on the
surface units. They also help catch spills. When they are kept clean,
they reflect heat better and look new longer.
If a reflector bowl gets dlscolored, some of the utensils may not be
flat enough, or some may be too large for the surface unlt. In etther
case, some of the heat thut% meant to go Into or around a utensil
goes down and heats the reflector bowl. lhls extra heat can dlsoolor
It. See Cooklng Gulde for further Informatton.