Warner Shelter Systems Limited MQ20H Assembly Instructions Manual

Peak marquee tent

Advertisement

Quick Links

MODEL
PEAK MARQUEE TENT
ASSEMBLY INSTRUCTIONS
PLEASE READ INSTRUCTIONS PRIOR TO ERECTING THE TENT.
PROPER INSTALLATION WILL ENSURE MAXIMUM USAGE AND
IF FURTHER INFORMATION OR CLARIFICATION OF ANY PART OF
THE ENCLOSED INSTRUCTION IS REQUIRED, PLEASE CONTACT:
1. Each installation site must be evaluated and the proper securing method determined by the
installer. Some soils require staking or securing different from that which was provided with the
tent.
2. Good judgment and common sense must be used along with installation guidelines. It is the
responsibility of the tent installer/maintainer to anticipate the severity of the weather along with
the proper time and method of setup and take down. Evacuation of the tent is recommended
before weather becomes extreme. A successful event is a safe event.
3. Proper safety equipment, such as hard hats, steel toe shoes, and safety glasses, should be used
to ensure a safe setup and take down.
..\graphicshome\marquee\manuals\MQ 20\MQ20H Manual 2009.pdf
MQ20H
IMPORTANT:
STABILITY OF THIS STRUCTURE.
WARNER SHELTER SYSTEMS LIMITED
1-800-661-6155 OR E-MAIL: warner@wssl.com
CAUTION

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MQ20H and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Warner Shelter Systems Limited MQ20H

  • Page 1 A successful event is a safe event. 3. Proper safety equipment, such as hard hats, steel toe shoes, and safety glasses, should be used to ensure a safe setup and take down. ..\graphicshome\marquee\manuals\MQ 20\MQ20H Manual 2009.pdf...
  • Page 2: Table Of Contents

    Do not attempt to setup the tent during thunderstorms, high winds or other extreme conditions. Safety Before the set up, instruct the crew on safety procedures. All local safety and fire regulations must be followed. ALL SITE PERSONNEL MUST FOLLOW OCCUPATIONAL HEALTH AND SAFETY PROCEDURES. ..\graphicshome\marquee\manuals\MQ 20\MQ20H Manual 2009.pdf PAGE 2...
  • Page 3: Parts List

    LOCK PIN 7843 TENT TOP 10977 STAKE 3/4 - 34” 10666 FLAG POLE EXT. 9523 CABLE: SLIDE WALL 20’ as required 10673 BASE: MQ ADJ. 24” 11064 GUY ROPE as required 10689 DROP SHEET 2100 ..\graphicshome\marquee\manuals\MQ 20\MQ20H Manual 2009.pdf PAGE 3...
  • Page 4: Frame Assembly

    • To install last loop, lift last corner to shorten the distance Cable Bottom between corners and hook the cable over the pin. Cable • Lowering the corner causes the corners to adjust their position and the cables to tighten. ..\graphicshome\marquee\manuals\MQ 20\MQ20H Manual 2009.pdf PAGE 4...
  • Page 5: Tent Top Installation

    C . • Attach one corner of the Tent Top to the frame by pulling handle B to place loop webbing A under the corner loop C . ..\graphicshome\marquee\manuals\MQ 20\MQ20H Manual 2009.pdf PAGE 5...
  • Page 6: Erecting The Tent

    Centrepole sleeve. Bottom Cross Cable Centrepole Sleeve • Secure the Centrepole to the Cross cables using the Lock-Pin. Cables Lock Pin PAGE 6 ..\graphicshome\marquee\manuals\MQ 20\MQ20H Manual 2009.pdf...
  • Page 7: Guy Rope Installation

    IMPORTANT: Site conditions may require guying and/or anchorage different from what was provided with the structure. • For inclement weather, Guy Ropes are recommended. Attach Guy Rope to corner loop as required Guy Rope ..\graphicshome\marquee\manuals\MQ 20\MQ20H Manual 2009.pdf PAGE 7...
  • Page 8: Wall Installation

    STANDARD BATON WALL WALL Side Release Buckles Baton Steel Buckle Post 4. If two or more walls are installed, fasten velcro strips on the edges of the walls for a wind proof seam. Velcro ..\graphicshome\marquee\manuals\MQ 20\MQ20H Manual 2009.pdf PAGE 8...
  • Page 9: Joiner Installation

    3. Attach clips to Cable: Slide Wall. 7. Insert the strap on the lapel through the ring in the adjacent valance and secure buckles. Pull loose strap to tighten. 4. Repeat procedure in the adjacent tent. ..\graphicshome\marquee\manuals\MQ 20\MQ20H Manual 2009.pdf PAGE 9...
  • Page 10: Summary

    Post Base. is in operational condition. Move Drop Sheet to clear the Cross Cable 18. Clean up site. intersection area. Insert Centrepole through the centre socket. To take down the tent, reverse the preceding steps. PAGE 10 ..\graphicshome\marquee\manuals\MQ 20\MQ20H Manual 2009.pdf...
  • Page 11: Care For Your Vinyl Tops

    0°F. The opaque fabrics are laminated and therefore become stiffer as the temperature drops. When the temperature is near 32°F, care should be taken in folding and moving the fabric to prevent cracking of the vinyl, especially the walls with windows. PAGE 11 ..\graphicshome\marquee\manuals\MQ 20\MQ20H Manual 2009.pdf...
  • Page 12 WSSL TENTS Warner Shelter Systems Limited creates fabric-clad structures to suit virtually every purpose, from special events, trade shows, catering and outdoor concerts to warehousing and industrial use. Our award-winning tents are user-friendly, durable and set-up quickly. We have earned a reputation for providing a high level of service to customers since 1970.

Table of Contents