(J951X*D Series) - Oxbox J951X U Series Installation Instructions Manual

J951X*D SERIES DOWNFLOW - 1 PIPE OPTIONS
COMBUSTION
AIR
Option
9
NOTE 5
Rubber
Grommet
See VIEW E for drain line positions
VIEW -E-
Inline Drain
(Factory Supplied)
See NOTE 4
NOTES
1. See Accessories section (page 17) for optional PVC Tee configurations and drainage options.
2. Drain lines must be trapped with a J-Trap or field supplied loop. Traps may be positioned inside or outside the cabinet. All drain lines must be routed externally
from the cabinet.
3. Inline drain is required only if "X" is greater than 6 feet.
4. Tubing needs to be cut to length and attached during unit installation.
5. Horizontal piping from inducer to flue pipe must be sloped 1/4" per foot to ensure drainage to PVC trap.
J951X*D SERIES DOWNFLOW - 2 PIPE OPTIONS
Flange
Plug
Option
12
See
NOTE 5
Rubber
Grommet
See VIEW E for drain line positions
Figure 36. Venting Options for Downflow Installations (J951X*D Series)
Rubber
Grommet
X
See
PVC Tee
PVC Trap
See VIEW F for drain line positions
Inline Drain
(Factory Supplied)
See NOTE 4
Field Supplied
Drain Line Attached
to PVC Trap
(Do Not Trap)
Rubber
Grommet
X
PVC Tee
PVC Trap
See VIEW F for drain line positions
COMBUSTION
AIR
Option
10
PVC Tee
PVC Trap
VIEW -F-
Field Supplied
Drain Line Attached
to PVC Trap
(Do Not Trap)
Flange
Option
13
PVC Tee
PVC Trap
COMBUSTION
AIR
Option
X
11
See
NOTE 5
Rubber
Grommet
See VIEW G for drain line positions
VIEW -G-
Inline Drain
(Field Supplied)
See NOTES 2 & 3
Plug
Option
X
14
See
NOTE 5
Rubber
Grommet
See VIEW G for drain line positions
Flange
39