How Recording Click On Audio Files - Charlie Lab Megabeat Pro Manual

Megabeat Pro

HOW RECORDING CLICK ON AUDIO FILES

Enter the "AUDIO EDIT" page, select the file where you wanna insert click, then press
the click key. By pressing the record key, the audio file will start and thru "VOCALIZER"
and "MIXER" keys, you can manually record the click on the whole song.
In this case VOCALIZER and MIXER keys work different as following:
VOCALIZER : first quarter of a measure
VOCALIZER
MIXER : other quarters of a measure
MIXER
You can insert the click also by marking only the first quarter of a measure thru the
" key (the remaining quarters, will be automatically integrated).
"
VOCALIZER
Once the click recording process will be over, you will be able to hear the song and, if you
like the result you got, you can save the audio song including all click informations by the
"SAVE" key.
CLICK RECORD
RECORD | | SAVE | | EXIT
Notes :
_ At the beginning of recording, don't worry to start at the first measure (it will be very
difficult to do so since you will not have any precount) because it will be automatically
integrated. But try to do your best in beeing very careful while you record the click. More
careful you will be, more satisfying (and error free) final results you will get.
3