Using Your Range; Using The Surface Units - Whirlpool RF3661XD Use And Care Manual

Using Your Range
To obtain the best cooking results possible, you must operate your range properly. This
section gives you important information for efficient and safe use of your range.
Using the surface units
Push in control knobs before turning
them to a setting. You can set them any-
where between HI and OFF.
Surface unit markers
The solid dot in the surface unit marker
Surface unit indicator lights
One of the Surface Unit Indicator Lights
Hot surface indicator lights
One of the Hot Surface Indicator Lights on
the cooktop will glow when a
surface unit becomes too hot
to touch. The Indicator Light
will continue to glow as long
as the surface unit is too hot
to touch, even after it is turned off.
Fire Hazard
Turn all controls off when done
cooking.
Failure to do so can result in death,
fire, or burns.
Until you get used to the settings, use
the following as a guide. For best results,
start cooking at the high setting; then turn
the control knob down to continue cooking.
SETTING
HI
5-8
5
RECOMMENDED USE
.To start foods cooking.
l
To bring liquids to a boil.
.To hold a rapid boil.
.To fry chicken or
pancakes.
l
For gravy, pudding, and
higher setting.
@To keeo food warm until
ready to serve.
8