Setting The Sound Mode - LG MDD264 Manual

Hide thumbs Also See for MDD264:
Table of Contents

Advertisement

Available languages

Available languages

Adjust the lock settings
To access the lock options, you must enter the 4-digit password. If you have not
yet entered a password you are prompted to do so. Enter a 4-digit password.
Enter it again to verify. If you make a mistake while entering number, press
CLEAR to delete numbers then correct it.
If you forget your password you can reset it. Press SETUP and Input '210499'
and press ENTER. The password has now been cleared.
Area code – Select a code for a geographic area as the playback rating level.
This determines which area's standards are used to rate DVDs
controlled by the parental lock. See the Area Codes on Page 19.
Rating – Select a rating level. The lower the level, the stricter the rating. Select
[UNLOCK] to deactivate the rating.
Password – Sets or changes the password for lock settings.
[New]: Enter a new 4-digits password using the numerical buttons then press
ENTER. Enter the password again to confirm.
[Change]: Enter the new password twice after entering the current password.
Adjust the others settings
DivX (R) Registration - We provide you with the DivXR VOD (Video on
demand) registration code that allows you to rent and purchase videos using
the DivXR VOD service.
For more information, visit www.divx.com/vod.
Press ENTER when [Select] icon is highlighted and you can view the
registration code of the unit.
Semi Karaoke - When a chapter/ title/ track is fully finished, this function shows
the score in the screen with a fanfare sound.
10
MDS714-A0U_FOUANI_ENG_8458.indd 10

Setting the sound mode

PRO EQ
1 Press PRO EQ.
2 "PRO EQ" is displayed.
3 Select the sound effect you want among BASS (100 Hz), MIDDLE (1 kHz),
TREBLE (10 kHz).
4 Adjust sound level turning each band control knob.
5 To finish the setting, press SET/CD II.
- This function is not available when a microphone is connected.
VOCAL FADER
You can enjoy the function as karaoke, by reducing singer vocal of music in the
various source. (MP3/ WMA/ CD/ Dolby Digital/ etc.) Press the VOCAL FADER,
and "FADE ON" will appear in display window.
To cancel it, press VOCAL FADER again.
- This function is available to use only when a microphone is connected.
- The quality of the VOCAL FADER may be different depending on the
recording conditions of music files.
- It is not available on the MONO mode.
2009.2.25 5:26:37 PM

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents