Whirlpool RF363PXVT Use And Care Manual page 9

Does your oven seem hotter or colder than your old oven? The temperature
of your old oven may have shifted gradually without you noticing the change.
Your new oven is properly adjusted to provide accurate temperatures. But when
comparing to your old oven, the new design may give you different results.
If after using the oven for a period of time, you are not satisfied with the
temperature settings, they can be adjusted by following these steps:
LOCKING SCREWS
1.
Pull the Oven Temperature Control 2. Loosen the lockina screws inside
Knob straight off.
the control knob. Eote the posi-
tion of the notches.
NOfCHES TdOTH
Adjusting the Oven Temperuture Conttal
TOOTH NOTCHES
3. To lower the temperature, move
the tooth a notch closer to LO.
Each notch equals about 10°F
(5°C).
4. To raise the temperature, move
the tooth a notch closer to HI. Each
notch equals about 10°F (5°C).
Tighten the locking screws and
replace the control knob.