Advertisement
NOTE: Before beginning, cover the play area to avoid possible ink damage.
1
1. Move the switch on the back of the
journal to the "ON" position. Put on the
bracelet and wave the middle of the
bracelet over the logo on the front of
the journal.
3
tab
storage for
magic ink pen
3. Place your smartphone into the holder
inside the journal. Press in the tab
before inserting larger phones.
Decorate your journal with the sticker sheets! Use the included notebook to help the
Project MC
2
girls complete secret missions for NOV8™.
™
2
2
QUICK START
2
storage for
UV light
2. Use the magic ink marker to write on the
inside cover of the journal or in the
included notebook. Then, remove the
UV light from the journal binding and
press and hold the button on the light to
reveal the message. Store the UV light in
the hidden compartment.
4
button
4. Should you misplace the bracelet, an
access button is located on the side
panel of the journal. Use a dull object,
like a paper clip, to press the button,
and the journal will open.
• While the journal can hold many smartphone models, the app is only compatible with iOS
devices. Only use smartphones in the journal as larger devices may not fit.
• Do not use markers other than the one included with this product on the journal as other
markers may be permanent and may not be removable.
• Magic ink marker cannot be removed from the notebook after writing messages. Use a pencil
and erase your messages to do the missions in the notebook again.
• Use a damp cloth to remove marker writing from the journal cover. Air dry only before writing
a new message. DO NOT use cleaners, abrasives, or other harsh chemicals.
• Recap the marker after using.
• Wash hands thoroughly after using the magic ink marker. DO NOT write on skin, furniture, etc.
• Keep the marker away from eyes.
• DO NOT leave the marker in the sun or in very hot areas.
• Do not use stickers on humans, pets, furniture or any item which may be damaged by sticker
or sticker removal.
• Always turn the journal "OFF" after playing to conserve battery life.
An adult must install fresh alkaline batteries in your UV light should the batteries need replacing.
Here's how:
1. Using a Phillips screwdriver (not included), remove the screw and battery compartment cover
located on the bottom half of the UV light.
2. Install three (3) AG3 (LR41) alkaline batteries into the UV Light. Make sure the (+) and (-) ends
face the proper direction as indicated inside the battery compartment.
3. Replace the compartment cover and tighten the screw.
access
• Use alkaline batteries for best performance and longer life.
• Use only the type battery recommended for the unit.
• Batteries should be replaced only by an adult.
• Insert batteries with the correct polarity ( + and – ).
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries.
• Do not short-circuit batteries.
• When not used for an extended time, remove batteries to prevent possible leakage
and damage to the unit.
• Do not mix rechargeable and non-rechargeable batteries.
• Rechargeable batteries are to be removed from the toy before charging.
• Rechargeable batteries are to be recharged only under adult supervision.
• Do not recharge non-rechargeable batteries.
• Exhausted batteries are to be removed from the toy.
• Do not dispose of batteries in fire as they may leak or explode.
IMPORTANT INFORMATION
CHANGING THE BATTERIES
3 x AG3
(LR41) Batteries
SAFE BATTERY USAGE
3
Advertisement
