Whirlpool RF324PXE Use & Care Manual page 34

CARING FOR YOUR RANGE
R
EMOVING THE OVEN DOOR
To replace:
NOTE: The door removal pins you inserted must still
be in both sides of the door.
1.
Grasp the door on the sides with your fingers on
the front of the door and your thumbs on the
inside surface.
2.
Rest the hinge hanger so that it is flat (at the
bottom of the hinge hanger on the bottom of the
front frame slot).
3.
Position the door with the hinge hanger slots
almost parallel to the front frame.
4.
Push up and in until the hinge hanger slots
become fastened to the range. Lower the door
and rotate it slightly from the front to the back
until the slots are fully fastened. The hinge
hanger will be close to the bottom of the front
frame slot.
5.
Pull door open about halfway and remove the
door removal pins. Save door removal pins for
future use.
6.
Close the door.
34
.
CONT
( )
Oven door
Remove door
removal pin
Up
In
Range
Hinge
hanger
Hinge
hanger
flat
Front frame
slot bottom