Advertisement
Troubleshooting
Problem
Scooter will not run.
Scooter run time is short.
Scooter suddenly stops working.
Scooter runs sluggishly.
If you need help or have damaged or missing parts, call the Customer Helpline:
Produced for Chad Valley Toys. Country of origin: Made in China
Address: 489 - 499 Avebury Boulevard, Central Milton Keynes, MK9 2NW.
www.argos.co.uk/chadvalley
9
Possible Cause
Battery is not charged.
Wires or connectors are
loose or unplugged.
Battery requires charging.
Battery will not accept full
charge.
Loose plug or wire.
Scooter is overloaded.
Unsuitable riding
conditions.
Thermal Fuse activated.
Solution
Fully charge the battery. First charge should be 10 hours
and up to 8 hours for recharges.
Check to ensure that charger is tightly plugged into
both the wall and the scooter. Check all scooter plugs
and connections are correctly attached.
Fully charge the battery. First charge should be 10 hours
and up to 8 hours for recharges.
Check to ensure that battery charger is tightly plugged
into both the wall and the scooter.
Battery may need to be replaced. Even with proper care,
rechargeable batteries do not last forever. The average
rechargeable battery life is 1 to 2 years depending on
scooter conditions and use.
Check all wires and connectors to make sure they are
connected and tight.
Make sure you do not overload the scooter by exceeding
the 40 kg. Maximum weight limit, going up steep
inclines or towing objects behind the scooter. Avoid
overloading the scooter as this will prematurely wear out
the batteries and components.
Ride only on solid, flat, clean and dry surfaces such as
pavement or level ground.
The Thermal Fuse will automatically activate via a power
reduction when the motor is overloaded.
An excessive overload (steep incline or too heavy of a
rider) could have caused the motor to overheat and
activated the Thermal Fuse. Scooter may run sluggishly
but will return to full power after a few moments.
+44(0)1253775570
Advertisement
