Table of Contents
Advertisement
3. Pull the surface unit straight away
from the receptacle.
4. Lift out the reflector
bowl. See
Cleaning
Chart on page 17 for
cleaning
instructions.
Replacing
2. Line up opening
in the reflector
bowl with the surface unit
receptacle.
3. Hold the surface unit as level as
possible
with the terminal
just
started
into the receptacle.
4. Push the surface unit terminal
into
the receptacle.
When the terminal
is pushed
into the receptacle
as
far as it will go, the surface unit will
fit into the reflector
bowl.
14
Advertisement
Table of Contents
