Advertisement
POWER & BATTERY
To power the unit, plug the power cord (included) into the AC Power Input on the back of the unit and a standard AC power outlet.
For battery power, this unit requires 6 C-size, batteries (not included).
CD
Loading and Playing a CD
Note: This unit is not compatible with MP3 CDs.
1.
Open the CD door and place a CD in the
boombox, label side facing up.
2.
Close the CD door.
Adjust the Source Switch to CD mode.
3.
4.
Press the Play/Pause button to begin playing
the loaded disc.
Programming a CD
1.
Press the Stop button to stop a loaded CD.
2.
Press the Program button.
"01" will blink on the display.
3.
Press the Skip/Search buttons to select a track.
Press the Program button to add the selected
4.
track to the program.
5.
Repeat steps 4 and 5 to program up to 20 tracks
to play in a
order.
Press the Stop button to cancel a program.
6.
RADIO
Radio Reception
An AM and FM antenna is built into the radio.
To improve radio reception, adjust the position
of the boombox.
Playing the Radio
1.
Slide the Source Switch switch to AM or FM
radio mode.
2.
Adjust the Tuning dial to tune the radio.
3.5 MM AUDIO INPUT
Using the Line In
3.5 mm audio input cable not included.
1.
Plug one end of a 3.5 mm audio input cable into
the Line In input on the back of the unit, and
plug the other end of the cable into the audio
output on an MP3 Player or other audio source.
2.
Press the Power button to power the unit on.
Slide the Source Switch on the front of the unit
3.
to Line In.
4.
Audio played through the connected device will
now be heard through the speakers.
Advertisement
