Whirlpool RF306BXP Use & Care Manual page 8

2. Set Oven Selector to BAKE.
4. Put food in the oven. Note: Oven
mcks, walls and door will be
hot.
During baking, the elements will
turn on and off to keep the oven
temperature at the setting. The
Oven Signal Light will turn on and
off with the elements.
The top element helps heat
durlng baking, but does not
turn red.
3. Set Oven Temperature Control to
the baking temperature you want.
The Oven Signal Light will come on.
The oven is preheated when the
Oven Signal Light first goes off.
5. When baking is done, turn both
the Oven Temperature Control
and the Oven Selector to OFF
Adjusting the Oven Temperature Control
Does your oven seem hotter or colder than your old oven? The temperature
of your old oven may have shifted gradually without your noticing the change.
Your new oven is properly adjusted to provide accurate temperatures. But -when
comparing to your old oven, the new design may give you different results,
If after using the oven for a period of time, you are not satisfied with the
temperature settings, they can be adjusted by following these steps:
8