Jet JPW-20 Operation Manual page 3

12. USE EYE PROTECTION. Solvents can cause serious eye damage. Wear ANSI approved chemical splash
safety goggles when cleaning.
13. DRESS SAFELY. Protective gloves and safety shoes must be used when working with and operating the
parts washer. Also, wear a protective hair covering to prevent long hair from getting caught in the parts
washer.
14. DON'T OVERREACH. Keep proper footing and balance at all times.
15. STAY ALERT. Watch what you are doing. Use common sense. Do not operate the parts washer when you
are tired.
16. CHECK DAMAGED PARTS. Before using the parts washer, any part that is damaged should be carefully
checked to determine that it will operate properly and perform its intended function. Check for alignment of
moving parts, breakage of parts, and other conditions that may affect its operation.
17. REPLACEMENT PARTS AND ACCESSORIES. When servicing, use only identical replacement parts. Only
use accessories intended for use with this parts washer. Approved accessories are available from where
this parts washer was ordered/purchased.
18. STORE IDLE EQUIPMENT. When not in use, the parts washer should be cleaned and then stored, fully
assembled, in a dry location to reduce rust. For safety, keep out of reach of children.
19. MAINTAIN TOOLS WITH CARE. Keep tools clean for better and safer performance. Follow instruction for
lubricating, cleaning and changing accessories. Keep handles dry, clean and free from oil and grease.
20. DISCONNECT FROM ELECTRICAL SUPPLY PRIOR TO SERVICING PARTS WASHER. The star washer
for electrical grounding in this parts washer must be used during assembly and maintenance.
3