Alarm Simulation - Bosch DiBos Operating Instructions Manual

Alarm simulation

If alarm simulation signals are configured, you will be able to see
this from the buttons shown (see alarm simulation bar) and from
whether the Alarm simulation element is active on the System
menu.
If you select alarm simulation, a dialog box in which you can trigger
alarms for a maximum of four detectors will appear. Another click
on the alarm button will cancel the simulation.
The alarm is represented on the simulation
detector (connection window) by a red
exclamation point.
A second possibility for alarm simulation is to use the alarm
simulation bar.
To carry out an alarm simulation, click on the
corresponding simulation button. Thus the color of
the button changes and the alarm is represented
on the simulation detector (connection window) by
a red exclamation point.
BOSCH Security Systems GmbH – 23 – A1 02.03