How To Use The Attache; Write / Delete Protection Switch - PNY Attaché Manual

3 HOW TO USE THE ATTACHE

The PNY Attaché is easy to use. The instructions on how to use the Attaché on Windows 98/98SE
/ME/2000/XP/Mac OS 9.x or above are shown below:
1. Turn on your computer.
2. Plug the PNY Attaché into the USB port of the computer. The "Removable Disk" symbol
should appear in "My Computer. Under Windows 2000/ME/XP/, the USB monitor icon
appear in the system tray of the taskbar.
3. The indicator of the Attaché will be flashing while the write or read action is processing.
4. To exit from the process and to unplug the PNY Attaché from the USB port of the computer, please
follow the steps below:
• Windows 98/98SE: Unplug the Attaché from the computer ONLY when Attaché's LED
stopped flashing. The Removable Disk symbol disappears automatically.
• Windows 2000/ME/XP: Click the icon
Mass Storage Device - Drive (E :)" pop- up list should appear next to the icon. Click on the
pop-up list and a "Safe to Remove Hardware" window will appear. Click "OK" to close this
window and then unplug the Attaché.
• Mac OS 9.x or above: Drag the device icon to the Trash Can, confirm remove, wait till the
LED light dimmed, then remove from the USB port.

4 WRITE / DELETE PROTECTION SWITCH

A write protect switch avoids accidentally deleting of data. The hardware write protect works like a
floppy disk write protect switch. (Handle the switch carefully. Use a little plastic stick.) See picture
for position:
________________________________________________________________________________________
Page 9 of 11
in the system tray of the taskbar. A "Stop USB
USB 2.0 FLASH DRIVE
will
91004242B