Product Features; Product Characteristics; Computer System Requirement; Operating System Requirement - PNY Attaché Manual

1.2 Product Features

• Compatible with USB specification revision 2.0 and 1.1
• Transfer rate up to 480Mbit per second at "full speed"
• Built-in USB 2.0-to-Flash Interface controller with bulk-only transport of USB mass storage
class, support PIO mode 4.
• Support Windows
• Support Windows
above, without any device driver
• LED indicator when the USB Flash Drive is in use
• Write/delete protection switch. Protect you from accidentally deleting of data
• Hot Plug & Play - Enable you to install anytime
• Durable solid-state storage - Data retention for at least 10 years
• No external power is required - DC 4.5V ~ 5.5V from USB port
•
Power consumption <145mA when in use
• EMI Compliance (FCC , CE)

1.3 Product Characteristics

1.3.1 Computer System Requirement

- IBM PC or Compatible PC or Notebook with USB interface
- CD-ROM drive

1.3.2 Operating System Requirement

- Windows 98/98SE
®
- Windows 2000
®
- Windows ME
®
- Windows XP
®
- Mac OS 9.x or above
®
- Linux Kernel 2.4.0 or above
®

1.3.3 Technical Parameters

- Capacity: 128MB, 256MB, 512MB
- Erase Cycle: 1,000,000 times
- Data Transfer Rate:
Read: up to 5.5MB/s
Write: up to 5.2MB/s
- Acoustic noise: 0 dB @ one meter
- Altitude: 80,000 (feet relative to sea level)
- Shock resistance: 1000G (max)
- Vibration: 15G peak to peak
- Connectivity: USB Port Type A
________________________________________________________________________________________
Page 4 of 11
98/ Windows 98SE with device driver
® ®
2000/ Windows ME/ Windows
® ®
USB 2.0 FLASH DRIVE
XP/ Mac 9.x or above/ Linux2.4.0 or
®
91004242B