Security Brands Ascent 16-ANTOMNI Install Manual

IN STA L L G U IDE
1

Make sure you have all items shown below.

(1-5/8" antenna pole not included)
Mounting Bracket (2x)
Omni Antenna (2x)
U-Bolt (2x)
Carriage Bolt (4x)
Hex Nut (4x)
TEK Screw (8x)
Lag Screw (8x)
25' Antenna Cable (2x)
4
Attach second antenna to second mounting
bracket using carriage bolts and hex nuts.
|
2
Disconnect existing antenna cables
from jacks on Ascent unit circuit board.
Gather existing antenna cables and tuck into the enclosure
out of the way.
5
Overlap mounting brackets to prepare
for U-bolt installation.
4G LTE OMNI ANTENNA EXTENSIO N KI T / 16-A NTOM NI
3
6
Attach first antenna to first mounting
bracket using carriage bolts and hex nuts.
Feed U-bolts through slots on
overlapping mounting brackets.
1 of 2