Katana 220001 Instruction Manual page 5

HAMMER DRILL BASICS
USE ON WOOD, MASONRY OR STEEL
The drill is designed for use on Wood (up to
25mm depth), Masonry (up to 13mm depth) or
Steel (up to 10mm depth)
TORQUE/ACTION SETTING COLLAR - HAMMER MODE
The hammer mode will deliver a rapid series
of beats as it drills - This is useful for Masonry
drilling. Only adjust the mode when drill is at a
complete stop.
GEAR SELECTOR (3) - GEAR 1 USAGE
The first gear is low speed, high torque. Only
adjust the gear when drill is at a complete stop.
CORDLESS Hammer Drill INSTRUCTION MANUAL
Grab & Twist
HOW TO ADJUST TORQUE/ACTION SETTING COLLAR
Hold the torque/action setting collar (2) and rotate
to the number desired. The higher the number, the
more torque the drill will output. Only adjust the
collar when the drill is at a complete stop.
TORQUE/ACTION SETTING COLLAR - DRILL MODE
The drill mode allows for maximum output. This is
useful for drilling holes and driving screws when
a higher torque is needed. Only adjust the mode
when drill is at a complete stop.
GEAR SELECTOR (3) - GEAR 2 USAGE
The second gear is high speed, lower torque. Only
adjust the gear when drill is at a complete stop. If
more torque is required use gear 1.
4
220001