homgeek NY-8608MC Instruction Manual page 5

16. Avoid touching moving parts.
17. Alteration or modification of any part of the blender base or container, including the use of any part or
parts that are not genuine authorized homgeek parts, may cause fire, electric shock, or injury.
18. The use of attachments, including canning jars, not expressly authorized or sold by homgeek for use
with this blender, including container, may cause fire, electric shock, or injury.
19. Do not use outdoors.
20. THIS PRODUCT IS INTENDED FOR HOUSEHOLD USE ONLY. Do not use blender for other than
intended use.
21. Check if the voltage you are using matches the voltage listed on the machine.
22. Do not let cord hang over edge of table or counter.
23. Do not let cord come into contact with hot surface, including the stove.
24. DO NOT operate this appliance on or near any hot surfaces (such as gas or electric burner or in a
heated oven). Never leave an appliance unattended when in use.
25. Keep hands and utensils out of container while blending to reduce the risk of severe injury to persons
or damage to the blender. A scraper may be used but must be used only when the blender is not running.
26. The tamper provided must be used only when the main part of the lid is in place.
27. Do not leave foreign objects, such as spoons, forks, knives or the lid plug, in the container as this will
damage the blades and other components when starting the machine and may cause injury.
28. Never attempt to operate with damaged blades.
29. DO NOT use the appliance if blade assembly is bent or damaged.
30. Before each use, inspect blades for damage. If blades are bent or damage is suspected, contact
homgeek to arrange for replacement.
31. Always operate blender with lid and lid plug firmly in place. The lid plug should be removed only when
adding ingredients and when using the tamper.
32. If you find unmixed ingredients sticking to the sides of the container, stop the appliance, remove the
lid, and use a spatula to dislodge ingredients. NEVER insert your hands into the container, as you may
contact one of the blades and experience a laceration.
33. DO NOT attempt to remove the container and lids from the motor base while the blades are still
spinning. Allow the appliance to come to a complete stop before removing lids and containers.
34. Add ingredients to the container. NOTE: Do not overfill! To avoid spilling, do not add ingredients past
the "MAX" fill line.
35. When blending hot liquids or ingredients, use caution; spray or escaping steam may cause scalding
and burns. Do not fill container over half full of the capacity. Always begin processing on the lowest speed
setting, variable speed 0 and slowly increase speed. Keep hands and other exposed skin away from the
lid opening to prevent possible burns.
36. When making nut butters or oil-based foods, do not process for more than one minute after the mixture
starts to circulate in the container. Processing for longer periods can cause dangerous overheating.
37. Machines and power cords should be stored in a safe place to prevent children from pulling on the
power cord.
38. Blades are sharp-handle with care. Clean around the blades in the container with extreme care to
avoid injury.
39. Never attempt to operate with the centering pad removed.
40. Make sure that the container and blades base are flush with the centering pad to ensure that the drive
spline is engaged with the drive socket before operating.
41. DO NOT attempt to Defeat the interlock mechanism.
42. DO NOT use your container to heat ingredients.
43. DO NOT continuously use your machine for more than 5 minutes.
- 03 -