1. Manuals
  2. Brands
  3. Ammo doors Manuals
  4. Door locks
  5. ATA PTX5
  6. Coding instructions

Ammo doors ATA PTX5 Coding Instructions

Grey/pink handset
Hide thumbs
1
2

Advertisement

Table of Contents

Coding a Transmitter Button for
Door Operation
1.
Press and hold the DOOR CODE button
2.
Press one of the four buttons on the transmitter for
two (2) seconds, pause for two (2) seconds, then
press the same button again for two (2) seconds.
3.
Release the DOOR CODE BUTTON.
4.
Press the transmitter button to test.
Coding a Transmitter Button to
the Courtesy Light
The transmitter can be programmed to operate the
courtesy light on the opener independently of the door
moving.
1.
Press and hold LIGHTCODE button
2.
Press one of the four buttons on the transmitter for
two (2) seconds, pause for two (2) seconds, then
press the same button again for two (2) seconds.
3.
Release the LIGHTCODE button.
4.
Press the transmitter button to test.
: 07 3290 4444
: 07 3290 1614
ATA PTX5 GREY/PINK HANDSET CODING INSTRUCTIONS
: 6/5-15 Lapis St, Underwood
ABN: 55 147 545 195
sales@ammodoors.com.au
:
www.ammodoors.com.au
:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ATA PTX5 and is the answer not in the manual?

Questions and answers

Related Manuals for Ammo doors ATA PTX5

Summary of Contents for Ammo doors ATA PTX5

  • Page 1 ATA PTX5 GREY/PINK HANDSET CODING INSTRUCTIONS Coding a Transmitter Button for Door Operation Press and hold the DOOR CODE button Press one of the four buttons on the transmitter for two (2) seconds, pause for two (2) seconds, then press the same button again for two (2) seconds.
  • Page 2 Coding a Transmitter Button for Pet (Pedestrian) Mode Press and hold both the DOOR CODE and MINUS (-) buttons (Fig. 29). Press one of the four buttons on the transmitter for two (2) seconds, pause for two (2) seconds, then press the same button again, or two (2) seconds.

Table of Contents