Setting The Alarm; Setting The Sleep Time - Lloyd's LCR340 Instruction Book

Radio
1. Press the "ON/OFF" button to turn the clock radio on or off.
2. Press the "AM/FM" button to select radio band.
3. Adjust the "TU+" or "TU-" to select the desired station.
4. Press the "VOL +" or "VOL -" button to adjust the volume.
5. Press the "M+" button to store your desired station. The display will show the "P01" means your station
will be saved on the first pre-set. If it displays "P02" this means the station is saved in the second pre-set.
Please note you can only recall the preset station until you save all 10 stations.

Setting the Alarm

1. You must switch off the radio before you set the alarm time.
2. Press and hold the "ALARM 1" or "ALARM 2" button until the Hour display begins to blink.
3. Now you can select to wake up by radio or buzzer. The LED with bell logo stands for wake up to buzzer.
The LED with music note logo stands for wake up to radio. Press "ALARM 1" button to select
different wake up modes.
4. You can set the alarm time, after you select the wake up mode. Press the "Hour" to adjust the
hour and press "Minute" button to adjust the Minute.
5. Press the "ALARM 1" button now to fix the alarm time.
6. Use the same method to set Alarm 2.
Canceling the Daily Alarm
Press the "ALARM OFF" button to stop the alarm. The alarm will operate 24 hours later as per alarm
Time set.
Cancelling the Alarm
Press the "ALARM 1" or "ALARM 2" buttons , the display will show "OFF" and all wake up mode icons
will also switch display off. The alarm setting is cancelled now.
Setting the Clock
1. You must switch off the radio before you set the clock time.
2. Press and hold the "TIME SET" button until the display begins to blink, then release the button.
3. Press the Hour and Minute button to adjust the hour and minute.
The PM indicator will light when the hour is set in the PM.
4. Press the "TIME SET" button to save time

Setting the Sleep Time

1. You must switch off the radio before you set the sleep time.
2. Press the Sleep button repeatedly to set the sleep time ( 90, 80, 70, 60, 50, 40, 30, 20, 10 min or OFF ).
Snooze and Alarm Reset
To use the snooze, press the SNOOZE bar when the alarm is sounding. The alarm will stop temporarily, but
will resume sounding after 9 minutes.
PLL Operating instruction