Advertisement
Surface
burners
1. Remove the cooktop, following the
instructions on page 18.
2.
Wipe off surface burners with warm,
eoapy water and a sponge after each use.
To remove cooked-on food, soak
the
burners in a
vinegar and water solution for
20
minutee. Scrub with a plastic
scrubbing pad.
3.
If poti
are clogged, clean wlth a
straight pin. DO NOT enlarge or distort
the ports. DO NOT use a toothpick to
clean the pot3s.
4. Occasionally
check the burner flames
forprop6rsizeandshapeassJmwn.A
good flame is
blue in cobr. If flames lift off
ports, are yelbw, or are noisy when
tumed off, you may need to clean the
burners (see above), or
call a qualiii
technician for adjustment.
5.
Replace cooktop.
Typical surface burner flame
mt tha highed
l
elting
19
Advertisement
