BAK REVOLVER X2 Supplemental Install Sheet page 2

Remount the factory
6
track system using the
original hardware
into the threaded holes
at the bottom of the
'S' clamps.
7
Remove the end cap from the
factory accessory track system.
Then slide the buckle strap bracket
into the rail. Replace the end cap.
Return to standard Installation Sheet, Step 8
Part# 318A0049 Rev. 9-30-15
Mount the strap clamp
as far forward on the rail
as possible and tighten.
Repeat on opposite side.
Forward, cab end
© Laurmark Enterprises, Inc., 2015
SUPPLEMENTAL INSTALL SHEET
Toyota Tundra w/ Track System