Related Manuals for S&B Filters 76-6000
Summary of Contents for S&B Filters 76-6000
- Page 1 INSTALLATION INSTRUCTIONS: P/N: 76-6000 15461 SLOVER AVE., FONTANA, CA 92337 | PH: 909.947.0015, FAX: 909.947.0603 | WWW.SBFILTERS.COM...
-
Page 2: Before You Start
Thank You! for purchasing your new S&B Filters Helmet Particle Separator. If at any time you need additional assistance with installation or have any other questions or comments, feel free to call our customer support team at 909-947-0015. You can also take advantage of our live chat at www.sbfilters.com and connect with an S&B representative immediately. - Page 3 RELATED ITEMS FOR YOUR PURCHASE Order Online today at www.sbfilters.com or through your local S&B distributor. 4’ Fresh Air Hose 6’ Fresh Air Hose 8’ Fresh Air Hose 1.5” Straps SKU# HP1607-00 SKU# HP1608-00 SKU# HP1609-00 SKU# HP1445-00 1.75” Straps 1.85”...
-
Page 4: Exploded View
EXPLODED VIEW:... - Page 5 PARTS LIST: 76-6000 ITEM PART NUMBER DESCRIPTION HARDWARE PACKS AL2008-00 HELMET PARTICLE SEPARATOR ASSEMBLY HP1603-00 AI1800-01 ADAPTER AI1800-01 AI1416-00 M6 SS FLAT WASHER AI1781-01 AI1802-00 M6 X 1.00 X 18 SS SCREW AI1782-02 AI1781-01 L-BRACKET HP1390-01 AI1740-00 M8 SS FLAT WASHER...
-
Page 6: Installation Steps
INSTALLATION STEPS: Determine where you want to mount the Helmet Particle Separator. The intake Install the Adapters (B) onto the Helmet Particle Separator Assembly (A) with can face forwards or backwards, but it needs to be mounted horizontally, the Screws (D), Washers (C), and Thread Locker (O), then tighten. Tool Needed: with the Exhaust Fan pointing straight down. - Page 7 INSTALLATION STEPS: Once you are satisfied with the position of the Particle Separator, tighten the Familiarize yourself with the Wire Harness (K). It has a red Power Wire Straps, double check that all mounting screws and nuts are tight and that they (BATT), a black Ground Wire (GND), an orange Accessory Wire (ACC), dual are securely mounting the Particle Separator on the roll cage.