Download Print this page

DOD GUNSLINGER Manual page 3

Mosfet distortion

Advertisement

USING GUNSLINGER:
Most guitarists/bassists will favor placing the Gunslinger at the
beginning of their chain of effects, so start with that placement.
A typical effects signal chain will consist of Distortion effects first
then Modulation effects (Chorus, Flanger, Phaser, Tremolo, etc...)
next and then finally Time based effects (Delay and Reverb).
Placing the Gunslinger toward the front of your chain or effects
will preserve the vibe no matter the pedal combination that
follows. That being said you may wish to experiment with
different effect placements.
SPECIFICATIONS:
Input
Output
Current Draw
Bypass
Power
Warranty
1/4" TS Unbalanced - 470 kΩ
1/4" TS Unbalanced - 100 Ω
20 mA
True Bypass
9VDC alkaline battery (not included)
HARMAN PS0913DC power adapter (optional)
also compatible with or 18VDC negative center tap PSU
1 Year
10653 River Front Parkway
South Jordan, UT 84095
801-566-8800
DOD
USA
Rev A - 6/15

Advertisement

loading