Advertisement
8
7
1. GAIN - adjusts the amount of distortion gain.
2. LEVEL - adjusts the overall output level of the distortion effect.
3. LOW - adjusts the amount of low frequencies in the distortion signal.
4. HIGH - adjusts the amount of high frequencies in the distortion signal.
5. INPUT - connect your instrument here.
6. FOOTSWITCH - turns the effect on and off.
7. LED - turns on when the effect is enabled.
8. OUTPUT - connect to the next pedal's input or to the input of your amplifier.
1
2
3
4
5
6
Advertisement
