Advertisement
Mounting the Monitor Bracket to a TV
Step 2
g
e
Insert the Tube Set to Ceiling Plate and Fix the Tube Set
Step 3
Step 3A: Find the Tube Set(a) from box and pass through the middle hole of Ceiling Plate(d), see Diagram 3A.
Step 3B: Determine the extension height you want for the Tube Set(a), make sure two holes of each tube are leveled one
by one. Use the Long Bolt(m) and Nut(n) to fix the bottom hole and use the Security Loop(p) to fix the top hole, see Diagram
3B. Then fasten the knob onthe Ceiling Plate to reduce the gap between the connection.
Diagram 3A
For Flat Back TV
a
d
g
f
For Curved Back TV
Diagram 3B
3
g h
Fasten the knob to
reduce the gap between
connection
p
m,n
Advertisement
