Page 1
Assembly Instructions for Plasma/LCD TV Stand Thank you for choosing our Plasma/LCD TV Stand, this stand was designed to mount flat panel televisions to a floor stand. It allows you to swivel your new television left and right 30 . Safety Warning: If you do not understand these directions, or have any doubts about the safety of the installation, please call a qualified contractor.
Page 2
Description Quantity Picture Aluminum Support Cover Plastic Support Cover Plastic Feet Connect Metal Pipe-430mm Connect Metal Pipe-320mm Connect Metal Pipe-40mm Top Glass Shelf Aluminum Head Metal Pipe Screw Connect Piece Top Plastic Support Cover Wheel Axis...
Page 6
Step 7: Mounting Monitor Brackets to a television with a Flat Back First, determine the diameter of the Bolt(20,22,24) your TV requires by hand threading them into the threaded insert on the back of the TV. If you encounter and resistance, pls stop immediately! Once you have determined the correct diameter, see the appropriate diagram below.
Page 7
Step 9: Mounting the flat panel television to the plate. Warning: Some televisions may require 2 people to lift! We are not responsible for personal injury or product damage. First choose the right vertical height you want(there are three hooks on the Monitor Bracket, it was used to change the height of TVs), then hook the Monitor Brackets(19) over the top of the Plate(18) as shown in the below diagram.