Advertisement
About this document
This document concerns the EB185 E-blocks
ARM programmer and daughter board.
1. Trademarks and copyright
PIC and PICmicro are registered trademarks of Arizona
Microchip Inc.
E-blocks is a trademark of Matrix
Technology Solutions Ltd.
2. Disclaimer
The information provided within this document is
correct at the time of going to press. Matrix TSL reserves
the right to change specifications from time to time.
3. Testing this product
It is advisable to test the product upon receiving it to
ensure it works correctly. Matrix provides test procedures
2
3
4
1
12
11
10
3
5
6
14
15
7
16
8
13
9
for all E-blocks, which can be found in the Support
section of the website.
4. Product support
If you require support for this product then please
visit the Matrix website, which contains many learning
resources for the E-blocks series. On our website you will
find:
•
How to get started with E-blocks - if you are new to
E-blocks and wish to learn how to use them from the
beginning there are resources available to help.
•
Relevant software and hardware that allow you to use
your E-blocks product better.
•
Example files and programs.
•
Ways to get technical support for your product, either
via the forums or by contacting us directly.
Board layout
1.
Screw terminals
2.
Power connector
3.
USB connector
4.
Power selector link block
5.
Port E I/O
6.
Reset switch
7.
Port A I/O
8.
Port B I/O
9.
Port C I/O
10. Port D I/O
11. JTAG interface
12. Power switch
13. ARM daughter board
14. Programming selector link block
15. Programming switch
16. Recovery selector link block
Copyright © Matrix Technology Solutions Ltd.
Advertisement
