Bose Panaray 502A Service Manual page 7
Array, bass box and controller
Hide thumbs
Also See for Panaray 502A:
- Installation manual (12 pages) ,
- Technical information (4 pages) ,
- Manual (4 pages)
Table of Contents
Advertisement
502C Controller Specifications (continued)
Input Impedance:
Output Impedance:
Input Level:
Output Level:
Low Frequency (LF) Output Mode:
LF Output Level:
Crossover Frequency:
THD:
Output Noise:
Offset:
Power Requirements:
SPECIFICATIONS
Balanced input, -10 dB level - 14k Ohms
Balanced input, +4 dB level - 6k Ohms
Unbalanced input (+ input), -10 dB level: 12k Ohms
Unbalanced input (+ input), +4 dB level: 4k Ohms
100 Ohms nominal
-10 dB or +4dB, selectable
8.0 Vrms maximum into 600 Ohms
Sum or normal
-18 dB to +3 dB, variable
140 Hz (Bi-amp), Roll-off slope: -18dB/octave
Midrange distortion of HF output: - 0.1% at 5V, 600 Hz
Low frequency distortion of LF out: - 0.1 % at 5V, 80 Hz
Bi-amp mode, HF outputs - 90µV
Bi-amp mode, LF outputs - 40µV
Passive mode, - 90µV
All channels - 15mV
120 VAC,50/60 Hz, 12 watts (US/Can)
230 VAC,50/60 Hz, 12 watts (Euro)
100 VAC,50/60 Hz, 12 watts (Japan)
240 VAC,50/60 Hz, 12 watts (Aus/UK)
7
Hide quick links:
Advertisement
Table of Contents
