Initial Setup - Renkforce Renkcast 3 Operating Instructions Manual

Initial setup

• Open WLAN settings on the device you want to use to set up the product, and establish a
connection to the stick's WLAN.
The name of the wireless network and the associated password to which you need to connect
your device will be displayed on your TV.
In addition, the number of connected devices is displayed in brackets at the top right.
The stick supports 2.4 and 5 GHz Wi-Fi networks. With a pointed object briefly push
the sunk button on the stick to switch mode. A small, blue "5G" icon on the screen
just, below the stick in the upper right corner indicates that the stick is in 5 GHz
mode.
• Open the previously installed EZCast app.
• When the app runs for the first time, a short tutorial is usually displayed. They contain brief
explanation on how to connect the stick to your WLAN network. This is necessary so that
the connected devices and the stick have Internet access. However, you can use most of the
functions without Internet.
• Once you are done with the tutorial, connect your device to the stick, if this hasn't happened
automatically already.
• If the plus sign appears in the center of the display after the tutorial, tap it to link the device to
the app. Then scan the QR code that is shown on your TV.
• Alternatively, at the top in the app's main view, tap the square button with the magnifying
glass and then select the EZCast device.
• Now connect the stick to the WLAN of your router. It is possible that the WLAN selection is
automatically displayed. If not, tap the three dashes at the top in the app's main view, go to
Settings and then Internet.
• Tap your router's WLAN network to select it.
• Enter the WLAN password and confirm with OK.
Top right on your TV you will see an indication again that the connection has been established.
• The basic configuration is now complete. You will find more settings in the menu with the
three dashes, which is the Settings menu.
EZCast app main features
Establishing a connection to the device
• You have got two options to connect your device to the stick. One would be to connect your
device to the access point of the stick. The other would be via your normal WLAN. The
second option requires that the stick is connected to your WLAN network, while this is not
an essential requirement in regard to the first option. Nevertheless, it is still recommended.
• In both cases, tap the square button with the magnifying glass at the top on the right in the
app and then select the EZCast device.
Mirror the connected device on your TV using the stick
• Once your device is connected, tap the button at the top with the two overlapping screens to
mirror the content. However, this feature is not available for Apple devices.
EZMirror
• Another option to mirror the screen content of your device is the "EZMirror" function in the
menu with the three dashes. However, this feature is not available for Apple devices.
Google Home
• For Android you can also use the Google Home App to mirror the screen content. Download
TM
the app from Google Play, install it and sign in with your Google Account. In the app, select
the stick by its name and start mirroring.
DLNA
• Also, this function is found in the menu with the three dashes. This function requires however,
that your device has an DLNA enabled app installed.
EZAir
• You can find this function in the menu with the three dashes under the item "EZAir". How-
ever, this feature is only available for Apple devices.
Here is a quick overview of the main functions available on the main page of the app:
• EZChannel
Create a free account and connect it to your stick. This gives you an extended range of
functions.
Discover and personalise your video channels. Browse videos on various media sites, such
as YouTube or Facebook. Use the autoplay function for the playlists you create as soon as
the stick is connected to the WLAN.
• Music
Use this item, if you want to stream music stored on your smartphone.
• Video
Use this item, if you want to stream videos stored on your smartphone.
• Photo
Under Photos, you can view the pictures stored on your smartphone on your TV, for example.
• Camera
This option allows you to watch the live image of your smartphone camera on your TV, for
example.
• Web
Here you can browse the web.
• Cloud storage
This feature is used, if you want to connect the app to a cloud service, Dropbox for example,
to retrieve or store data.
Resetting to factory settings
Proceed as follows to reset the product to factory settings.
• Connect the product to the power supply and connect it to a TV.
• Wait until the boot process is complete and the startup screen appears.
• Hold down the sunk button for more than 5 seconds or until the startup screen disappears.
Then release the button again.
• The product will restart with the factory settings.
Care and cleaning
Do not use abrasive cleaning agents, cleaning alcohol or other chemical solutions
since these could damage the housing or even impair operation.
• Disconnect the product from the mains supply before each cleaning procedure.
• Use a dry, lint-free cloth to clean the product.
Disposal
Electrical and electronic equipment does not belong in the regular household waste.
Once the product becomes unusable, dispose of it in accordance with the relevant
statutory regulations.
Declaration of conformity (DOC)
We, Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau, hereby declare that this
product conforms to the 2014/53/EU directive.
The full text of the EU conformity declaration is available via the following Internet
address:
www.conrad.com/downloads
Select a language by clicking a flag symbol and enter the order number of the prod-
uct in the search field; then you will be able to download the EU declaration of
conformity in PDF format.
Technical data
Operating voltage ................................ 5 V/DC
Power supply ....................................... via micro-USB 2.0 port
Power consumption ............................. max. 500 mA
Ports .................................................... Micro-USB 2.0 port (power); HDMI
WLAN .................................................. IEEE802.11b/g/n, 2,4 GHz; IEEE802.11a/n/ac, 5 GHz;
Frequency range/
transmitting capacity ............................ 2.412 – 2.472 GHz, 12.42 dBm; 5.180 – 5.240 GHz,
Resolution ............................................ 1920 x 1080; max. 60 FPS
Video encoder ..................................... H264; H265
Memory ................................................ 256 MB internal memory; 128 MB Flash memory
Supported operating systems .............. Android
Cable length ........................................ approx. 100 cm
Dimensions (L x W x H) ....................... approx. 77 x 29 x 9 mm
Weight ................................................. approx. 18.5 g
Operation conditions ............................ +10 °C to +40 °C, max. 20 - 70% relative air humidity,
Operation conditions ............................ 0 °C to +50 °C, max. 5 - 80% relative air humidity,
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
© Copyright 2020 by Conrad Electronic SE.
dual band
12.48 dBm; 5.745 – 5.825 GHz, 7.01 dBm
5.0 or later; Apple iOS 10 or later;
TM
Windows 7, Windows 8.1, Windows
® ®
64 Bit); MacOS 10.10 or later
noncondensing
noncondensing
1693026_V5_0220_02_m_dh_en
10 (32 and
®