Advertisement
Marking of sensor position
Cleaning
This light fixture is made from quality materials that will last for many years with minimum care. When cleaning, make
sure you have unplugged your fixture, and have allowed sufficient time for the unit to cool to room temperature. Clean the
housing and glass cover using a damp soft cloth. Plug your fixture back in only after the fixture has thoroughly dried.
Trouble Shooting
Minor problems often can be fixed without the help of an electrician. Before taking any corrective action on the fixture, shut
off power supply at the circuit breaker panel to avoid electrical shock.
PROBLEM
Light will not come on
The following parts are available for re-order if damaged or missing.
Spare Parts List:
Mounting Screw (C)
Metal Disk (D)
5-YEAR LIMITED WARRANTY:
All products are warranted to be free of defects in material and workmanship for five (5) years from date of purchase.
This warranty is limited to the correction of any such defect, or the replacement of any such defective item(s), provided
that: (a) we are properly notified and consent to return of the item(s) in question:(b) the item (s) is / are returned with
proof of purchase date; and (c) it is found upon inspection by us that the item (s) is / are defective as noted above. This
warranty dose not cover labor costs, consequential damages, nor dose it apply to any item(s) that have been improperly
installed, overloaded, altered, or otherwise abused by the customer, its agent(s) or emplyee(s). Finishes are specially
excluded from the terms of this warranty since they are subject to environmental maintenance deemed beyond our
control. Other than the described obligation, we assume no further liability with respect to the sale or use of our products.
We make no warranty, express or implied, and disclaim any warranty of merchantability or fitness for a particular purpose.
Label
Sensor
POSSIBLE CAUSE
1. Power is off
2. Bad plug connection
Assembly Kit
5312MM
Long Double-
sided Tape
Page 4 / 4
This hardware package contains an indicator label. You
may stick the label on the cabinet in order to mark the
position of the sensor if so desired.
CORRECTIVE ACTION
1. Check if power supply is on
2. Check if driver and connectors are
plugged in properly.
Wood Screw (E)
Assembly Kit
5313MM
Short Double-
sided Tape
150414
Advertisement
