Step 2 - Haier GE AD07SL2VHA Installation Instructions Manual

Installation Instructions
Step 2 - Installation of the Slim Duct Unit (Cont.)
G.
Route the 14AWG stranded 4 conductor power/
communication cable and the wired remote
cable to the air handler. Use reducing washers
and appropriate connector to attach the power/
communication cable to the unit. The wired remote
cable will enter the unit through a rubber grommet.
The 4 conductor cable connects to the terminal block
at terminals 1, 2, 3, and ground. The wired remote
cable connects to the air handler main board at
connector CN1. Re-install electrical box cover.
31-5000099
H.
The unit is now ready for connection to the
ductwork. The return air duct can be configured
as either a rear inlet or bottom inlet.
Rear side air inlet
Return Duct
Bottom side air inlet
Return Duct
Diffuser
Diffuser
11