Subscribe to Our Youtube Channel
Related Manuals for QEM IQ009
Summary of Contents for QEM IQ009
- Page 1 IQ009 Starter Kit 1. Informations 2. Drivers Installations 3. Development 4. Problem solving StarterKit_EN - 21/05/2007...
- Page 2 Driver USB It is possible to download the drivers from the download area in the website: www.qem.it or you can find them in the QEM CD in the directyory “Driver/IQ009”. Kit content: (A) 1 IQ009 interface + (B) 1 USB cable...
- Page 3 ● Connect the cable B to an USB port of your PC. ● Connect the cable C (or D) to the IQ009 interface and the miniUSB port of the MicroQmove ● (or PROG port of the Qmove) . On the PC will appear this dialog form: Select “No, not this time.”...
- Page 4 The USB driver installation is now complete Press “Finish”. On the PC will appear this dialog form: Select “No, not this time.” and then press “Next”. Select in this window “Install from a list or specific location ( )”. Advanced And press “Next”.
- Page 5 Once inserted the right path press “Next”. Press “Finish”. The installation of the IQ009 drivers is complete. N.B. The operating system will open a new communication port (COM), its name will be according to the first available port number. For example: if in the system two ports are used (COM1 and COM2), the COM3 port will be used.
- Page 6 Development environment settings Install the development environment “Qview” from the CD or from the website: www.qem.it. From the directory “Qview” execute the file. The installation of Qview 5 is a standard for Windows operating system. Start “Qview 5” and select “Options – Program setup...”.
- Page 7 Problem solving Solution: check that the selected COM port is right. Problem: the serial communication between PC and Qmove does not open Go to peripheral management and check out the port number. Solution: Windows error code 10 indicates a hardware error or the drivers installation failure. This could happen if a device is not supplied properly to Problem: drivers installation fails and operate (for example connected to a bus powered hub...
- Page 8 Problem: Windows XP shows an error and terminates the installation. Solution: the ways to install successfully the device are two. The certified driver (if available) installation or changing th driver option. To change the actual drivers signing setting go to the “control panel / system”, click on “hardware”...
Need help?
Do you have a question about the IQ009 and is the answer not in the manual?
Questions and answers