Advertisement
› › › TOWER ASSEMBLY
5
Put the bottom and top halves of the globe
5
onto the globe base. Press them in securely.
Attach the globe funnel to the top of the
6
globe.
Pour some of the gumballs into the globe.
7
Examine the tower assembly. The gumballs
are dispensed from the globe at the top
and gravity pulls them down the tracks,
which spiral around the tower. The globe
can be rotated around on the top of the
tower so that the knob and dispenser can be
positioned above any of the four sides.
4
6
There are circular pegs on each of the four sides
of the tower. In the assembly instructions, the
pegs are referred to from the top down. For
example, this symbol means the second peg
from the top:
parts to the tower, first put the peg through the
round part of the hole in the track piece, then
slide the track piece down to lock it in place in
the narrower part of the hole.
The globe funnel allows you to return gumballs
to the globe after an experiment.
Continue to the next page to start experimenting
with the different tracks and stunt devices.
7
Done!
. To attach tracks and other
2
1
2
3
4
5
6
7
8
9
10
Advertisement
