In These Cases - Panasonic NR-B181W Operating Instructions Manual

In these cases

The power failed.
The power plug was
disconnected.
The refrigerator is not used
for a long time.
When you move or
transport the refrigerator.
When you replace the "LED
lighting".
● Keep the doors closed and do not store additional food.
● Wait at least 7 minutes, and then plug in the power plug.
If it is plugged in immediately, the compressor will be overloaded, which may
cause a malfunction.
● Remove all foods and drinks and clean the refrigerator.
1 Disconnect the power plug.
2 Clean the compartments and the ice-making tray. (P.10)
3 Keep the doors opened for two to three days to dry the compartments.
When drying is insufficient, the compartment may get moldy or have a foul
smell.
● Do not transport refrigerators in a horizontal position.
Doing so cause a failure of pipes around the compressor
possible to be broken.
● Move the refrigerator with at least two people, holding
the non-retractable leg, the adjustable leg (P.6) and the
attaching portion of anti-overturning belt (P.6).
1 Remove foods and discard ice/water in the ice tray.
2 Disconnect the power plug.
3 Raise the adjustable leg.
4 Drain water from the evaporating pan.
Note:
● If frost remains on the cooling unit (not visible from the outside) in the
refrigerator, then water may spill when it is moved.
It takes approximately 15 hours for the frost on the cooling unit to melt after the
refrigerator power plug is disconnected.
● When replace "LED lighting", please contact with your authorized dealer or
service center.
Appendix
Turn
Adjustable leg
around
Evaporation pan
The hands hold the Evaporation
pan slowly pull out
11